Henan qi Xiang Slide Guide Electrical Appliance Co., Ltd.
Service Hotline:0373-8622255

Main steps for single pole slip line installation

The single-pole sliding line is a kind of power supply equipment, mainly for supplying power to mobile equipment. The conductor used is aluminum alloy material, and the outer protection is made of special polyvinyl chloride material, which can play the functions of dustproof, waterproof and electric shock. The utility model has the advantages of simple structure and convenient installation, and is mainly applicable to the power supply lines of mobile equipment such as mining, metallurgy, chemical industry, machinery, docks and freight yards.

The single-pole sliding wire is also relatively simple to install. The main installation steps are as follows: 1. Select the fixed bracket. The selection of the bracket is mainly determined according to the model of the mobile device and the overall length of the single-pole sliding wire; 2. When the mounting is fixed After the bracket, install the sliding line suspension bracket on the fixing bracket, then put the single pole sliding contact wire into the suspension bracket, and then tighten the nut on the sliding line suspension bracket to fix it, and the sliding contact line The end must be installed. 3. If a single-pole sliding line has multiple mobile devices running at the same time, it is recommended to install the maintenance section. It can make your maintenance and maintenance more convenient. The installation position of the maintenance section is not fixed, but it can be based on your actual situation. The situation is adjusted. 4. Check, check to ensure that the power can be turned on, test run, power needs to be slowly adjusted from small to large, and then check whether there is an error in each link.

Address:Henan Xinxiang Changyuan County Hoisting Industrial Park, Wei eight middle road north  TelePhone:0373-8622255  MobilePhone:13233826699  E-mail:403043216@qq.com

Mobile